Voopoo Coils Drag 2 Mini Kit Vinci RBA Too Software Pnp Pod review

Vapeciga Voopoo Drag 2 Mini Kit is dual mod 18650. Capable of 157 watts. It is available in 2 colors both have a silver frame, but the choice is sticker black carbon fiber sticker carbon fiber white or black and red. They said 0.025 to 0.03 at the end second player (the site of the 0025 mod chip sites that says 0.03) It sports a new (chip gene.fun) chip equipped with a software package to allow adjustments. Some features include adjustable screen curved watt temperature curve and air conditioning and a variety of standard safety features.

Specifications of the manufacturer:

Power: 5-157W

Batteries (load balancing battery is compatible with all brands) 2 x 18650

Size: 90 x 54 x 24 mm

Color: Black with white / black red

resistance to low-power mode: 0.05Ω

low resistance mode TC: 0.05Ω

New Feature: Super compensation mode and power mode.

TC MODE: SS, NI, TI, North Carolina, TCR, CCR

First impressions and features

When I came to this mod, I must say I’m impressed. The appearance and quality of construction mod is not what you expect from such a cheap device. He had a weight to it and feels solid. 510-pin fine and has a resistance constant and stable output for me. the screen is a pretty standard. As you can be seen in a DNA chip or smoant mods, etc. The menu system is a bit of a learning curve, but well designed and easy to learn and remember. It has a curved fashion to full watts where you can customize your vaporizer in 1 second programmable on-chip or by software. You can also erase modes do not want, for example, I removed Ni and Ti-mode devices. Overall, the build quality, performance and features that you can not expect this to be as cheap mod. Can be expected to cost more than it does.

Performance mode Watts

First, let’s address the elephant in the room. Fire claim 0.025 to 0.03 seconds behind. This is something I see thrown around a lot of criticism. To me too he felt as keywords in an attempt to exaggerate the already good Voopoo Vinci RBA show new (aka do not need a marketing BS substance for sale, must sell) I tested the speed of fire, because I do not feel the need. This is not 2014, I can not remember the last time I use a mod that a delay of a fire in it. Meanwhile, rapid fire mods. And the difference between saying and 0.07 seconds 0.03 seconds is not relevant. Magazine that continues to pump the sound is more like a future revision ads player. The only time to talk about the speed of shooting mod is if you have a noticeable delay. This mod is not, or a model that I tested and verified. Without delay the fire, but the same can be said for any i mod. As I said, there is no need to talk, except mod is a delay, then it will be a scam. I hope that the amendments are not delays in the fire at this time. It is a normal thing. If you want a little fun test to test its delayed entry (also known as reaction time) 58% of which are between 0.2 and 0.35 seconds, 10 times what the chip and still feels a moment. Here is a test you can take the reaction timer and here are the data that are the result of the response of your time!

Now that we have the way, let’s get into some of the data. Watts performance mode this chip is very good. In less than 50 watts or less mod resistance it was about the precise death. At 100 watts in the worst case, with a resistance of 0.01 ohms (most mods struggled) it was only 7 watts lower. On the other resistance, no more than 4 watts out. The test was 125 watts 11 watts to 0.01 ohms, but no more than 7 further resistance except as 0.52 ohms affecting the volt limit. mod no output was 157 watts and more. Peaking at 168 watts. It also offers a limit of 39 amps (better mod battery dual) and the limit of 7,158 volts (also one of the best mod battery dual) For comparison with Therion 167 (dual mod 18650 with a limit of 167 watts one of the best chips and most expensive on the market) is the chip that topped out at 165 watts. A 0.13 ohm (I tested the low and resistance is easier to specify output) to 125 watts and 14 watts to 100 watts down to 12 watts low. The overall performance in watts traveling mode is very similar to the DNA of 250 chips in a dual battery configuration. mod also took a reading very stable and accurate resistance. The connection 510 of the pin is solid and the outlet of the flexible and coherent device. Not much more you can ask for. Overall, this is a fantastic way watt devices.

These are the most noticeable changes. Slide 2 OG entire matte paint job and it was not very good and very easy to scratch, you can see here

Platinum one, but we redid the paint job is bright brown and was much better and much more resistant to scratches. While good in the paint compared to OG, but some prefer the matte look and yes because it was the shiny fingerprint magnet, too. Here is a peak comparison also added in an accent color with SS line around the frame and the screen compared to the Voopoo Too Coils click in are all black matte can be seen that the resin is still great, but as you can see here on the side of the other

screen

Some minor improvements were made on the screen. This remains more or less the same but the platinum screen has slightly bluish and a little lighter. Here you can see the other side

Unfortunately, although still quite low as you can see here

rincoe mechanical man left mod is slightly brighter and enough bite and the right mix is Eleaf istick much brighter.

conclusion

This is the difference that, in addition to things, is the same model so the feeling was still there. The only difference is that I will remove “My delicate painting” and move it to the pros as “good paint job”, but beyond that, there are more changes in my slip 2 release of platinum, but the people want figures know what those differences were so small writing. Thaks everyone for reading

thermostat

Using wire mode SS SS (setting the TCR in 1400 fared better wear) mod has done a great job. Output after the mild weather and uniform. It is protected against dry and did throw a good job of sucking the juice before cutting. With the construction of normal test (single room SS316 and SS316 double spaced) performance was fantastic. It feels a little on the low side hits about 20 degrees lower. I found the best 400-480 depending on your preference. 500 is the maximum before Vape becomes too hot. 550 will begin to burn his little cotton. A coil fantasy I large single building during normal use, I found very good Vapeciga Voopoo Drag Software as the exit ramp is fast and smooth. Very nice vaporizer. A disadvantage is that the limit of 80 watts not achieve even the very low ohms. When you drop down .2ohm with great luxury watts coil was never more than 45 watts. It means the way there and take forever. Not much vaporizer. Still protected, but the lack of ways to do good in this situation. So overall, I say the temperature control of these devices are mostly well, an exception being the large double coil of less than 0.2 ohm to increase the power is not there. 80 watt limit will not make full use of 80 also in this situation is a no go. All other situations so it was nice. While not over-accumulation of too low resistance and can be built 80 watts of heat, a large vaporizer. He spent all of me because most people go to these limits.

General impression

Watt mode performance is one of the best ever tested individually. Very stable, very soft, very consistent and very accurate. Watt adding curves to make a better choice than mod precision without. temperature control very well in most situations. Build quality is excellent. The design is elegant and simple. I was very impressed with this device, in particular less than $ 50 the price (as low as $ 40 Y) have one of the best values ​​in the vaping right along combat and Charon. VooPoo probably a horrible name, but they do great mod and lost. This mod is really put IJOY, wismec, Smok, etc. Joyetech shame IMO. You can make a great show, great quality at an affordable price mod

Pro:

manufacturing quality

Performance mode Watts

Watt characteristics curve

Performance mode temperature (in most situations)

Appearances (simple and elegant design)

suite for customizing software

Good menu system with many mod environment

Less than 50 years for me, as low as $ 40 now

Drawbacks:

will not update the firmware for me

temperature control performance in certain situations (large coils under .2ohms)

conclusion

So with all that said, I recommend this mod? I do not like or is not difficult, but leans strongly toward him. If the temperature control is performed was virtually no-brainer. One of the best devices in watts operating mode width to actually build budget money is excellent. If temperature control is used, the accumulation time is not as shown above, there is a great temperature control of the vaporizer. The only reason that this would not change if only Voopoo Pnp Pod Kit get code a control coil temperature with a double below 0.2 ohms. Beyond this mod is almost a must for all fans and a great option for those who want to upgrade their mod mod or just new, overall, this mod was added to the sheet Google My recommendation as the temperature control device intermediate and as a W mode devices (here this register is updated regularly in order to be free of lead. has three tokens for juice, for mods, and 1 to Attys)

As usual, Frei Anthony and I still sincerely hope you can say that you do the same and I see you at the next revision

Some future comments: Geekvape Mech Pro, Aspire Archon, Pharaoh RTA Aspire Cleito Kel, Kaos Erebus 25mm RTA Envii Terra Octo RTA iJoy Lux, Rasa Blazer 200, Dovpo Snape Fuchai Duo 3 Captain iJoy, Cornelius 3ohm deposit side, Smoant Rabox, and more . If you know the product you want to see my review, feel free to ask

You can buy here:Voopoo Coils  https://www.vapeciga.com/collections/voopoo

sourcemore thanks

Leave a Reply

Your email address will not be published. Required fields are marked *